A free body diagram is a simple sketch that shows every force acting on one object, and it is the step that makes most physics homework help problems manageable. If you can draw it correctly, the rest is algebra from Newton’s second law. This guide gives you a reliable method for free body diagrams, a worked example on an incline and the mistakes that cost students the most marks.
What is a free body diagram?
A free body diagram, often called an FBD, shows a single object, drawn as a dot or a simple box, and arrows for each force acting on it. Each arrow starts on the object, points in the direction of the force and is labelled with the force’s name or symbol. Nothing else from the picture is kept. The diagram turns a messy scene into a clear question: which forces act on this object, and which way do they point?
What is the step-by-step method?
Step 1: Isolate the object
Choose the one object whose motion you want to analyse, and redraw it by itself. Everything else in the problem, such as ropes, surfaces, other blocks and the Earth, is removed and replaced by the forces it exerts on your object.
Step 2: Draw only the forces acting on that object
Go through the possible forces one at a time:
- Weight (gravity): always present near the Earth’s surface, pointing straight down, with magnitude mg.
- Normal force: present if the object touches a surface. It pushes on the object, perpendicular to the surface.
- Friction: present if the surface is rough and the object slides or tends to slide. It acts parallel to the surface, opposing the sliding.
- Tension: present if a rope or string is attached. It pulls along the rope, away from the object.
- Applied or other forces: any push or pull given in the problem.
A useful check: for each arrow, name what is exerting that force. If you cannot name it, the arrow does not belong.
Step 3: Choose axes
Pick x and y axes that make the problem easiest. If the object moves along a slope, tilt the axes so that x points along the slope and y is perpendicular to it. Then only the weight needs to be split into components.
Step 4: Break forces into components
Any force that does not lie along an axis is replaced by its x and y components, using sine and cosine of the angle. Check which angle you are using and where it sits in your sketch before you pick sine or cosine.
Step 5: Apply Newton’s second law along each axis
Write ΣFx = max and ΣFy = may. Count forces pointing in the positive direction as positive and the others as negative. If the object does not accelerate along an axis, the sum along that axis is zero.
Worked example: a block on a rough incline
A block of mass m slides down a ramp that makes an angle θ with the horizontal. The ramp has kinetic friction with coefficient μk. Find the acceleration.
- Isolate: draw the block alone.
- Forces: weight mg straight down; normal force N perpendicular to the ramp, pointing away from it; kinetic friction f parallel to the ramp, pointing up the slope because the block slides down.
- Axes: x along the slope, pointing down the slope; y perpendicular to the slope.
- Components: the weight splits into mg sinθ along the slope (down) and mg cosθ into the ramp.
Perpendicular to the slope, the block does not accelerate, so N − mg cosθ = 0 and N = mg cosθ. Along the slope, mg sinθ − f = ma. Kinetic friction is f = μkN, so f = μkmg cosθ. Substituting gives ma = mg sinθ − μkmg cosθ. The mass cancels, so a = g(sinθ − μk cosθ).
Check the result: if there is no friction (μk = 0), a = g sinθ, which is the standard frictionless result. The formula also shows why a steeper ramp gives a larger acceleration, which matches experience.
What mistakes should you avoid?
- Drawing forces the object exerts. Only forces acting on your object belong in its diagram. The force the block exerts on the ramp is not drawn.
- Adding “ma” as a force. Mass times acceleration is the result of the net force, not another arrow. Keep it on the other side of the equation.
- Inventing a “force of motion”. An object moving does not need a forward force. Only draw forces you can name.
- Assuming N always equals mg. On a slope, with extra vertical forces or in an elevator, the normal force changes. Find it from the y equation.
- Mixing up action-reaction pairs. Newton’s third law pairs act on different objects, so they never appear together on one diagram.
- Switching sign conventions. Pick a positive direction and keep it for every force along that axis.
How can you practise?
Start with simple cases: a book on a table, a hanging mass on a rope, then a block pulled across a floor. For a hanging mass at rest, the tension equals the weight; if it accelerates upward, T − mg = ma. Draw the diagram before touching any numbers, and say aloud what exerts each force. If a diagram still looks wrong, share your sketch and attempt with a tutor, and our guide on how to ask a tutor a good homework question shows how to frame it.
For a broader approach to physics problems, read the step-by-step physics problem-solving guide, and if you are preparing for an exam, see online AP physics tutoring that helps. On Our Easy Game, you post your question, tutors send offers, and you compare price, rating and timing before choosing. You can also check the subjects we cover.
Frequently asked questions
Should I draw the object as a dot or a box?
Either is fine. A dot is simpler when all forces act through one point. A box helps when you need to show where forces are applied or when you deal with rotation later in the course.
How do I know which way friction points?
Friction opposes the sliding, or the tendency to slide, between the surfaces. If the block slides down a ramp, friction on it points up the ramp.
Why do I tilt the axes on an incline?
Tilting the axes puts the acceleration along one axis and leaves nothing along the other. Only the weight then needs to be split, which gives fewer components and fewer mistakes.
Key takeaways
- Isolate one object and draw only the forces acting on it.
- Name the source of every arrow; if you cannot, remove it.
- Choose axes that match the motion, then resolve forces into components.
- Apply ΣF = ma along each axis, and test your answer with simple limiting cases.
Studying engineering? See engineering homework help: habits for statics and circuits.






